Show Queuing Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show queuing [fair]
Use the show queuing command to display information associated with configured queuing methods.
Syntax Description
fair
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Usage Examples
The following is a sample output from the show queuing command:
>enable
#show queuing
Interface Discard threshold
fr 1
fr 2
ppp 1
61200990L1-35E
Optional. Displays only information on the weighted fair queuing configuration.
Command was introduced.
Conversation subqueues
64
64
64
Copyright © 2005 ADTRAN
256
256
256
Enable Mode Command Set
250