Show Ip Community-List Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip community-list [<community-list-name>]
Use the show ip community-list command to display any or all defined community lists in the router
configuration.
Syntax Description
<community-list-name> Optional. Specifies the name of the community list you wish to display. If this
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1
Usage Examples
The following example shows two community lists, one of which permits all routes containing community
number 10:67, and another which permits routes containing community number 10:68 and the internet
community number, but denies routes containing community number 10:45.
NetVanta4305#show ip community-list
ip community-list CommList1:
permit 10:67
ip community-list CommList2:
permit 10:68 internet
deny 10:45
61200990L1-35E
parameter is omitted, all defined community lists will be displayed.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
202