Peer Default Ip Address Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
peer default ip address <address>
Use the peer default ip address command to specify the default IP address of the remote end of this
interface.
Syntax Description
<address>
Default Values
By default, there is no assigned peer default IP address.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 3.1
Release 11.1
Functional Notes
This command is useful if the peer does not send the IP address option during PPP negotiations.
Usage Examples
The following example sets the default peer IP address to 192.22.71.50:
(config)#interface demand 1
(config-demand 1)#peer default ip address 192.22.71.50
61200990L1-35E
Specifies the default IP address for the remote end (A.B.C.D).
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
679