Set Comm-List Delete Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Route Map Command Set
set comm-list <name> delete
Use the set comm-list delete command to specify a list of communities to delete. Use the no form of this
command to disable this feature.
Syntax Description
<name> Specifies the name of the list of communities to delete.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example deletes the community list named listname:
(config)#route-map MyMap permit 100
(config-route-map)#set comm-list listname delete
61200990L1-35E Copyright © 2005 ADTRAN 1181