Dial-Backup Force - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup force [backup | primary]
Use the dial-backup force command to manually override the automatic dial-backup feature. This can be
used to force a link into backup to allow maintenance to be performed on the primary link without
disrupting data. Use the no form of this command to return to the normal dial-backup operation state. For
more detailed information on PPP dial-backup functionality, refer to the Functional Notes and Technology
Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always]
Syntax Description
backup
primary
Default Values
By default, this feature is disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures the AOS to force this interface into dial-backup:
(config)#interface ppp 1
(config-ppp 1)#dial-backup force backup
61200990L1-35E
on page
Force backup regardless of primary link state.
Force primary link regardless of its state.
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
795.
HDLC Command Set
799