Deny (Community List Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Community List Command Set
deny
Use the deny command to deny a BGP route that matches the community number.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 9.3 Command was introduced.
Usage Examples
The following example denies BGP routes that match community numbers:
(config)#ip as-path-list listname
(config-comm-list)#deny
61200990L1-35E Copyright © 2005 ADTRAN 1112