Aaa Authorization - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
aaa authorization [config-command | console]
Use the aaa authorization to enable or disable authorization for configuration mode commands and for
console mode. Use the no form of this command to return to the default setting. For more detailed
information on AAA functionality, refer to the Technology Review section of the command aaa on
296.
Syntax Description
config-command
console
Default Values
By default, authorization for console is disabled. However, configuration mode commands are authorized
by default.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example enables authorization of configuration mode commands:
(config)#aaa authorization config-command
The following example enables authorization of console commands:
(config)#aaa authorization console
61200990L1-35E
Enables authorization for configuration mode commands. Only level 1
(unprivileged) and level 15 (privileged) commands are supported.
Allows authorization to be applied to the console.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
on page
293