Line-Timeout <Minutes - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
line-timeout <minutes>
Use the line-timeout command to specify the number of minutes a line session may remain inactive before
the AOS terminates the session. Use the no form of this command to return to the default value.
Syntax Description
<minutes>
Default Values
By default the line-timeout is set to 15 minutes.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example specifies a timeout of 2 minutes for all SSH sessions:
(config)#line ssh 0 4
(config-ssh0-4)#line-timeout 2
61200990L1-35E
Specifies the number of minutes a line session may remain inactive before the
AOS terminates the session. Valid range: 0 to 35791.
Entering a line-timeout value of 0 disables the feature.
Command was introduced.
Copyright © 2005 ADTRAN
Line (SSH) Interface Config Command Set
487