Boot System Flash Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
boot system flash <filename> [no-backup | <backup filename>]
Use the boot system flash command to specify the system image loaded at startup.
Syntax Description
<filename>
no-backup
<backup filename>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Functional Notes
Detailed instructions for upgrading the AOS and loading files into flash memory are found on the ADTRAN OS
Documentation CD.
61200990L1-35E
Specifies the filename (located in flash memory) of the image (filenames are
case-sensitive) - image files should have a .biz extension
Specifies that no backup image is to be saved to the system.
Specifies a name for the backup image.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
303