Clock Timezone - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
clock timezone <text>
The clock timezone command sets the unit's internal clock to the timezone of your choice. This setting is
based on the difference in time (in hours) between Greenwich Mean Time (GMT) or Central Standard
Time (CST) and the timezone for which you are setting up the unit. Use the no form of this command to
disable this feature.
Syntax Description
Subcommands are specified in the Functional Notes section for this command.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 6.1
Depending on the clock timezone chosen, one-hour Daylight Savings Time (DST)
correction may be enabled automatically. See clock [auto-correct-dst |
no-auto-correct-dst]
61200990L1-35E
Command was introduced.
on page 305
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
for more information.
307