Dial-Backup Shutdown Command (Ppp Interface Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup shutdown
Use the dial-backup shutdown command to deactivate all dial-backup functionality in the unit.
Dial-backup configuration parameters are kept intact, but the unit will not initiate (or respond) to
dial-backup sequences in the event of a network outage. Use the no form of this command to reactivate the
dial-backup interface. For more detailed information on PPP dial-backup functionality, refer to the
Functional Notes and Technology Review sections of the command.
Syntax Description
No subcommands.
Default Values
By default, all AOS interfaces are disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example deactivates the configured dial-backup interface:
(config)#interface ppp 1
(config-ppp 1)#dial-backup shutdown
61200990L1-35E
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
PPP Interface Configuration Command Set
914