Wall Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
wall <message>
Use the wall command to send messages to all users currently logged in to the AOS unit.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example sends the message "Reboot in 5 minutes if no objections" to the CLI screen of
everyone currently connected:
>enable
#wall Reboot in 5 minutes if no objections
61200990L1-35E Copyright © 2005 ADTRAN 279