Antireplay (Crypto Map Manual Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Crypto Map Manual Command Set
antireplay
Use the antireplay command to enable antireplay sequence number checking for all security associations
created on this crypto map. Use the no form of this command to disable.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following example enables antireplay sequence checking on crypto map VPN 100:
(config)#crypto map VPN 100 ipsec-manual
(config-crypto-map)#antireplay
61200990L1-35E Copyright © 2005 ADTRAN 1053