Ip Domain-Name Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip domain-name <name>
Use the ip domain-name command to define a default IP domain name to be used by the AOS to resolve
host names. Use the no form of this command to disable this function.
Syntax Description
<name>
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Functional Notes
Use the ip domain-name command to set a default name which will be used to complete any IP host
name that is invalid (i.e., any name that is not recognized by the name server). When this command is
enabled, any IP host name that is not initially recognized will have the ip domain-name appended to it and
the request will be resent.
Usage Examples
The following example defines adtran as the default domain name:
(config)#ip domain-name adtran
61200990L1-35E
Specifies the default IP domain name used to resolve unqualified host names. Do
not include the initial period that separates the unresolved name from the default
domain name.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
363