Auto-Config Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
auto-config [filename <name> | restart | retry-count <number>| server
<name or address>]
Use the auto-config command to enable the automatic self-configuration feature in ADTRAN OS. Use the
no form of this command to halt the Auto-Config process. For more detailed information on auto-config,
see the Auto-Config Configuration Guide on the documentation CD, PN 61200560L1-29.2.
Refer to the Auto-Config Configuration Guide (61200560L1-29.2) for more information
on this command. This document is located on the ADTRAN OS Documentation CD
provided with your unit
Syntax Description
filename <name>
restart
retry-count <number>
server <name or address> Specifies the IP address or host name of TFTP Server from which to
Default Values
By default, auto-config is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following command enables auto-config:
(config)#auto-config
Disabling and re-enabling auto-config restarts the download process.
61200990L1-35E
Specifies the configuration filename to download.
Restarts auto-config parameters.
Specifies the maximum number of retries. Range: 0 to 1000.
download.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
300