Tftp-Server Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
tftp-server <server>
Use the tftp-server command to specify the IP address or DNS name of the TFTP server published to the
client.
Syntax Description
<server>
Default Values
By default, no tftp server is defined.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The following example specifies the IP address of the TFTP server:
(config)#ip dhcp pool MyPool
(config-dhcp)#tftp-server 192.168.1.1
The following example specifies the DNS name of the TFTP server:
(config)#ip dhcp pool MyPool
(config-dhcp)#tftp-server MyServer.adtran.com
61200990L1-35E
Specifies the DNS name or dotted notation IP address of the server.
Command was introduced.
Copyright © 2005 ADTRAN
DHCP Pool Command Set
1161