Show Ip Policy-Stats Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip policy-stats <policyname>
Use the show ip policy-stats command to display a list of current policy class statistics. Refer to ip
policy-class <policyname> max-sessions <number>
policies.
Syntax Description
<policyname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Usage Examples
The following example displays a list of current policy class statistics:
>enable
#show ip policy-stats
61200990L1-35E
Optional. Displays policy class statistics for a specific policy class.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
on page 390 for information on configuring access
225