Ip Ftp Access-Class In Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip ftp access-class <policyname> in
Use the ip ftp access-class in command to assign an access policy to all self-bound File Transfer Protocol
(FTP) sessions.
Syntax Description
<policyname>
Default Values
By default, all FTP access is allowed.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Usage Examples
The following example applies the configured ACP (labeled Inbound_FTP) to inbound FTP traffic:
(config)#ip ftp access-class Inbound_FTP in
61200990L1-35E
Specifies the configured access policy (ACP) to apply to inbound FTP traffic.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
380