Ip Sip Database Local Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip sip [database local | location] <username> <ip address>
Use the ip sip database local command to store the database of SIP usernames across a reboot. Use the ip
sip location command to configure the SIP location database parameters. Use the no form of the ip sip
location command to return to the defaults.
Syntax Description
database local
location
<username>
<ip address>
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example specifies an IP SIP location of 192.33.5.99 for a user named 2001:
(config)#ip sip location 2001 192.33.5.99
61200990L1-35E
Stores the database on the local machine.
Sets the parameters for the location database.
Specifies the username to use.
Specifies the IP address for the SIP server.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
405