Logging Email Address-List Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
logging email address-list <email address> ; <email address>
Use the logging email address-list command to specify one or more email addresses that will receive
notification when an event matching the criteria configured using the logging email priority-level
command is logged by the AOS. Refer to logging email priority-level [error | fatal | info | notice |
warning] on page 421 for more information. Use the no form of this command to remove a listed address.
Syntax Description
<email address>
Default Values
By default, there are no configured logging email addresses.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example specifies three email addresses to use when sending logged messages:
(config)#logging email address-list
admin@adtranemail.com;ntwk@adtranemail.com;support@adtranemail.com
61200990L1-35E
Specifies the complete email address to use when sending logged messages.
(This field allows up to 256 characters.)
Enter as many email addresses as desired, placing a semi-colon (;) between
addresses.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
418