Timers Lsa-Group-Pacing Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
timers lsa-group-pacing <seconds>
Use the timers lsa-group-pacing command to change the link state advertisement (LSA) refresh interval.
Syntax Description
<seconds>
Default Values
By default, this value is set at 240 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Usage Examples
The following example sets the refresh interval for six minutes:
(config)#router ospf
(config-ospf)#timers lsa-group-pacing 360
61200990L1-35E
Sets the LSA refresh interval in seconds (range: 10 to 1800).
Command was introduced.
Copyright © 2005 ADTRAN
Router (OSPF) Configuration Command Set
1127