Login Local-Userlist - Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
login local-userlist
Use the login local-userlist command to enable security login for the terminal session requiring the
usernames and passwords configured using the username/password Global Configuration command. Use
the no form of this command to disable the login local-userlist feature.
All user properties assigned using the username/password command are valid when using
the login local-userlist command.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set for access to the unit.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example displays creating a local userlist and enabling the security login feature:
(config)#username my_user password my_password
(config)#line telnet 0
(config-telnet0)#login local-userlist
When connecting to the unit, the following prompts are displayed:
User Access Login
Username: my_user
Password:
Router#
61200990L1-35E
Command was introduced.
Copyright © 2005 ADTRAN
Line (Telnet) Interface Config Command Set
498