Show Ip Policy Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip policy
Use the show ip policy command to display which route-map is associated with which interface for
policy-based routing.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 and Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following is sample output from this command:
>enable
#show ip policy
Interface route-map
local equal
Ethernet0/2 equal
Ethernet0/3 AAA-02/06/04-14:01:26.619-1-AppSpec (Dynamic)
61200990L1-35E
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
221