Show Queue Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show queue <interface>
Use the show queue command to display conversation information associated with an interface queue.
This command shows summary and per-conversation information.
Syntax Description
<interface>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Release 9.1
Release 11.1
Usage Examples
The following is a sample output from the show queue command:
>enable
#show queue fr 1
Queueing method: weighted fair
Output queue: 18/25/200/64/1027 (size/highest/max total/threshold/drops)
Conversations 2/4/256 (active/max active/max total)
(depth/weight/highest/discards) 12/256/33/0
Conversation 10, linktype: ip, length: 67
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 17 (udp), source port 99, destination port 99
(depth/weight/highest/discards) 6/256/25/0
Conversation 23, linktype: ip, length: 258
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 6 (tcp), source port 16, destination port 16
61200990L1-35E
Displays the queueing information for the specified interface. Type the show
queue ? command to display a list of valid interfaces.
Command was introduced.
Command was expanded to include HDLC interface.
Demand interface was added.
Copyright © 2005 ADTRAN
Enable Mode Command Set
249