Show Radius Statistics - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide

show radius statistics

Use the show radius statistics command to display various statistics from the RADIUS subsystem. These
statistics include number of packets sent, number of invalid responses, number of timeouts, average packet
delay, and maximum packet delay. Statistics are shown for both authentication and accounting packets.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Usage Examples
The following is an example output using the show radius statistics command:
>enable
#show radius statistics
Number of packets sent:
Number of invalid responses:
Number of timeouts:
Average delay:
Maximum delay:
61200990L1-35E
Command was introduced.
Auth.
3
0
0
2 ms
3 ms
Copyright © 2005 ADTRAN
Enable Mode Command Set
Acct.
0
0
0
0 ms
0 ms
251