Logging Forwarding Priority-Level Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
logging forwarding priority-level [error | fatal | info | notice | warning]
Use the logging forwarding priority-level command to set the threshold for events sent to the configured
syslog server specified using the logging forwarding receiver-ip command. All events with the specified
priority or higher will be sent to all configured syslog servers. Refer to logging email priority-level [error |
fatal | info | notice | warning]
return to the default priority.
Syntax Description
Sets the minimum priority threshold for sending messages to the syslog server specified using the logging
forwarding receiver-ip command.
The following priorities are available (ranking from lowest to highest):
error
fatal
info
notice
warning
Default Values
By default the logging forwarding priority-level is set to warning.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example sends all messages with warning level or greater to the syslog server listed using
the logging forwarding receiver-ip command.
(config)#logging forwarding priority-level warning
61200990L1-35E
on page 421 for more information. Use the no form of this command to
Logs events with error and fatal priorities.
Logs only events with a fatal priority.
Logs all events.
Logs events with notice, warning, error, and fatal priorities.
Logs events with warning, error, and fatal priorities.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
428