Ip Scp Server - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Global Configuration Mode Command Set

ip scp server

Use the ip scp server to enable the secure copy (SCP) server. SCP is a more secure form of the older
Berkley r-tool RCP or remote copy. It allows an SCP client to send or receive files to/from the unit. SCP
relies on Secure Shell (SSH) for authentication and encryption of the data transfer.
Syntax Description
No subcommands.
Default Values
By default, the secure copy server is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example enables the secure copy server:
(config)#ip scp server
61200990L1-35E Copyright © 2005 ADTRAN 404