Dial-Backup Auto-Restore (Tunnel Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup auto-restore
Use the dial-backup auto-restore command to configure the interface to automatically discontinue
dial-backup when all network conditions are operational. Use the no form of this command to disable the
auto-restore feature. For more detailed information on PPP dial-backup functionality, refer to the
Functional Notes and Technology Review sections of the command.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically restore the primary connection when the failure
condition clears.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures the AOS to automatically restore the primary connection when the
failure condition clears:
(config)#interface ppp 1
(config-ppp 1)#dial-backup auto-restore
61200990L1-35E
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
Tunnel Configuration Command Set
975