Ts16 - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide G.703 Interface Configuration Command set

ts16

Use the ts16 command to enable timeslot 16 multiframe to be checked on the receive signal. Use the no
form of this command to disable timeslot 16.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enables timeslot 16 multiframing:
(config)#interface e1 1/2
(config-e1 1/2)#ts16
61200990L1-35E Copyright © 2005 ADTRAN 598