Logging Console Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Global Configuration Mode Command Set
logging console
Use the logging console command to enable the AOS to log events to all consoles. Use the no form of this
command to disable console logging.
Syntax Description
No subcommands.
Default Values
By default, logging console is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enables the AOS to log events to all consoles:
(config)#logging console
61200990L1-35E Copyright © 2005 ADTRAN 417