Logging Forwarding Receiver-Ip Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
logging forwarding receiver-ip <ip address>
Use this logging forwarding receiver-ip command to specify the IP address of the syslog server to use
when logging events that match the criteria configured using the logging forwarding priority-level
command. Enter multiple logging forwarding receiver-ip commands to develop a list of syslog servers to
use. Refer to logging forwarding priority-level [error | fatal | info | notice | warning]
related information. Use the no form of this command to remove a configured address.
Syntax Description
<ip address>
Default Values
By default, there are no configured syslog server addresses.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Usage Examples
The following example specifies a syslog server (with address 172.5.67.99) to use when logging
messages:
(config)#logging forwarding receiver-ip 172.5.67.99
61200990L1-35E
Specifies the IP address (in dotted decimal notation) of the syslog server to use
when logging messages.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
on page 428 for
429