Match Community Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
match community <name> [exact-match]
Use the match community command to configure the route map to route traffic based on a specified
community. Use the no form of this command to discontinue matching.
Syntax Description
<name>
exact-match
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series and
Total Access 900 Series units.
Command History
Release 10.1
Usage Examples
The following example instructs the route map named MyMap to match the community named
MyCommunity:
(config)#route-map MyMap permit 100
(config-route-map)#match community MyCommunity
61200990L1-35E
Specifies the name of the community you want to match.
Optional. Specifies that the route map must match the community name
exactly.
Command was introduced.
Copyright © 2005 ADTRAN
Route Map Command Set
1173