Command Reference Guide
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 9.1
Release 11.1
Usage Examples
The following example configures the demand interface to receive LLDP packets:
(config)#interface demand 1
(config-demand 1)#lldp receive
61200990L1-35E
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
674