Show Modules Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show modules [verbose]
The show modules command displays information on the current system setup.
Syntax Description
verbose
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, and 5000 Series units.
Command History
Release 6.1
Usage Examples
The following example displays the modules installed in the unit.
>enable
#show modules
Slot
0
1
2
3
4
5
6
7
61200990L1-35E
Enables detailed messaging.
Command was introduced.
Ports Type
3 Netvanta 5305
1 T3 Module
- Empty
- Empty
- Empty
- Empty
- Empty
- Empty
Copyright © 2005 ADTRAN
Enable Mode Command Set
Serial # Part #
*********** 1200990L1
*********** 1200832L1
----------- -----------
----------- -----------
----------- -----------
----------- -----------
----------- -----------
----------- -----------
H/W Rev
A
A
----------
----------
----------
----------
----------
----------
239