ADTRAN 5000 Series Command Reference Manual page 224

Command Reference Guide
Usage Examples
The following is sample output from the show ip policy-sessions command:
>enable
#show ip policy-sessions
Protocol (TTL)
Src IP Address
--------------------------------------------------------------------------------------------------------------------------------
Policy class "Public":
tcp (13)
192.168.1.142
tcp (13)
192.168.1.142
tcp (13)
192.168.1.142
tcp (13)
192.168.1.142
The following is sample output from the show ip policy-sessions all command:
>enable
#show ip policy-sessions all
Protocol (TTL)
Src IP Address
-------------------------------------------------------------------------------------------------------------------------------------------
Policy class "Public":
tcp (0) - inactive
192.168.1.142
tcp (0) - inactive
192.168.1.142
tcp (0) - inactive
192.168.1.142
tcp (0) - inactive
192.168.1.142
61200990L1-35E
Src Port Dest IP Address Dst Port
2621 192.168.19.2
2622 192.168.19.2
2623 192.168.19.2
2624 192.168.19.2
Src Port Dest IP Address Dst Port
1025 192.168.19.2
1028 192.168.19.2
1029 192.168.19.2
1036 192.168.19.2
Copyright © 2005 ADTRAN
Enable Mode Command Set
NAT IP Address
1 10.10.10.1
2 10.10.10.1
3 10.10.10.1
4 10.10.10.1
NAT IP Address
3135 10.10.10.1
3138 10.10.10.1
3139 10.10.10.1
3146 10.10.10.1
NAT Port
3000
3001
3002
3003
NAT Port
3605
3606
3607
3608
224