Authorization Commands - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
authorization commands [<level> l <name> l default]
Use the authorization commands command to assign AAA authorization methods to lines. You must first
turn AAA on for this command to become available.
Syntax Description
<level>
<name>
default
Default Values
The default for this command is off.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example applies the default authorization method to line 1:
(config)#aaa on
(config)#line ssh 1
(config-ssh1)#authorization commands 1 default
61200990L1-35E
Specifies a command level (1 or 15).
Applies a named authorization method to this line.
Applies the default authorization method to a line.
Command was introduced.
Copyright © 2005 ADTRAN
Line (SSH) Interface Config Command Set
486