Version Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
version [1 | 2]
Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all
IP interfaces. This global configuration is overridden using the configuration commands ip rip send
version and ip rip receive version. Use the no form of this command to return to the default value.
Syntax Description
1
2
Default Values
By default, RIP is not enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Usage Examples
The following example specifies RIP version 2 as the global RIP version:
(config)#router rip
(config-rip)#version 2
61200990L1-35E
Specifies RIP version 1 be used globally.
Specifies RIP version 2 be used globally.
Command was introduced.
Copyright © 2005 ADTRAN
Router (RIP) Configuration Command Set
1144