ADTRAN 5000 Series Command Reference Manual page 200

Command Reference Guide
Usage Examples
The following are output variations of the show ip bgp neighbors command:
>enable
#show ip bgp neighbors
BGP neighbor is 10.15.43.17, remote AS 100, external link
Configured hold time is 180, keepalive interval is 60 seconds
Default minimum time between advertisement runs is 30 seconds
Connections established 6; dropped 5
Last reset: Interface went down
Connection ID: 15
BGP version 4, remote router ID 8.1.1.1
BGP state is Established, for 01:55:05
Negotiated hold time is 180, keepalive interval is 60 seconds
Message statistics:
InQ depth is 0, OutQ depth is 0
Local host: 10.15.43.18, Local port: 179
Opens:
Notifications: 0
Updates:
Keepalives: 116
Unknown:
Total:
Foreign host: 10.15.43.17, foreign port: 1048
Flags: passive open
#show ip bgp neighbors 10.15.43.34 advertised-routes
BGP local router ID is 10.0.0.1, local AS is 101.
Status codes: * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network NextHop
*> 1.0.0.0/8 10.15.43.17
*> 2.0.0.0/9 10.15.43.17
61200990L1-35E
Sent Rcvd
1 1
0
0 8
116
0 0
117 125
Metric Path
1 100 i
1 100 i
Copyright © 2005 ADTRAN
Enable Mode Command Set
200