Aaa Authentication Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
aaa authentication [banner | fail-message | password-prompt |
username-prompt]
Use the aaa authentication command to control various features of the AAA subsystem authentication
process. For more detailed information on AAA functionality, refer to the Technology Review section of
the command aaa on on page
Syntax Description
banner
fail-message
password-prompt
username-prompt
Default Values
banner
fail-message
password-prompt
username-prompt
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Usage Examples
The following is a typical example of customizing the AAA authentication process:
(config)# aaa authentication banner #
Enter TEXT message. End with the character '#'.
User login authentication:#
(config)#
(config)#aaa authentication fail-message #
61200990L1-35E
296.
Sets the banner shown before user authentication is attempted. The banner can
be multiple lines.
Sets the message shown if user authentication fails. The message can be multiple
lines.
Sets the prompt for the user's password. The prompt is a single line. Enclose the
string in quotation marks.
Sets the prompt for the user's name. The prompt is a single line. Enclose the
string in quotation marks.
User Access Verification
Authentication Failed
Password:
Username:
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
287