Username (Ppp Interface Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
username <username> password <password>
Configures the username and password of the peer to use for PPP authentication.
Syntax Description
<username>
<password>
Default Values
By default, there is no established username and password.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Functional Notes
PAP uses this entry to check received information from the peer. CHAP uses this entry to check the
received peer hostname and a common password.
Usage Examples
The following example creates a username of ADTRAN with password ADTRAN for the PPP link
labeled 5:
(config)#interface ppp 5
(config-ppp 5)#username ADTRAN password ADTRAN
61200990L1-35E
Specifies a username by alphanumerical string up to 30 characters in length (the
username is case-sensitive).
Specifies a password by alphanumerical string up to 30 characters in length (the
password is case-sensitive).
Command was introduced.
Copyright © 2005 ADTRAN
PPP Interface Configuration Command Set
966