Auto-Summary Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Router (RIP) Configuration Command Set
auto-summary
Use the auto-summary command to have RIP version 2 summarize subnets to the classful boundaries.
Use the no form of this command to disable this summarization.
Syntax Description
No subcommands.
Default Values
By default, auto-summary is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Functional Notes
Use this command if you are subdividing a classful network into many subnets and these subnets are to be
advertised over a slow link (64k or less) to a router that can only reach the classful network via the router
you are configuring.
Usage Examples
The following example configures the router to not automatically summarize network numbers:
(config)#router rip
(config-rip)#no auto-summary
61200990L1-35E Copyright © 2005 ADTRAN 1135