Show Ip Policy-Class Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip policy-class <policyname>
Use the show ip policy-class command to display a list of currently configured access policies. Refer to ip
policy-class <policyname> max-sessions <number>
policies.
Syntax Description
<policyname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Usage Examples
The following is a sample output from the show ip policy-class command:
>enable
#show ip policy-class
ip policy-class max-sessions 0
Policy-class "Trusted":
0 current sessions (6000 max)
Entry 1 - allow list MatchAll
61200990L1-35E
Optional. Displays policy class information for a specific policy class.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
on page 390 for information on configuring access
222