Show Ip Bgp Community Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip bgp community [<community number> . . . <community number>
| internet | no export| local-as | no-advertise] [exact]
Use the show ip bgp community command to display only those routes learned via Border Gateway
Protocol (BGP) that match the community numbers specified in the command. If no communities are
specified, all BGP routes are shown.
Syntax Description
<community-number>
internet
local-as
no-export
no-advertise
exact
Default Values
By default, this command displays all BGP routes.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 10.1
61200990L1-35E
Optional. Displays routes that contain this value in their community attribute. This
is a numeric value that can be an integer from 1 to 4,294,967,295 or string in the
form "aa:nn", where the value of "aa" is the AS number and the value of "nn" is the
community number. Multiple community-number parameters can be present in the
command.
Optional. Displays routes that contain this value in their community attribute. This
represents the well-known reserved community number for the INTERNET
community.
Optional. Displays routes that contain this value in their community attribute. This
represents the well-known reserved community number for
NO_EXPORT_SUBCONFED. Routes containing this attribute should not be
advertised to external BGP peers.
Optional. Displays routes containing this value in the community attribute. This
represents the well-known reserved community number for NO_EXPORT. Routes
containing this attribute should not be advertised to BGP peers outside a
confederation boundary.
Optional. Displays routes containing this value in the community attribute. This
represents the well-known reserved community number for NO_ADVERTISE.
Routes containing this attribute should not be advertised to any BGP peer.
Optional. Displays BGP routes with the community numbers specified and only
those specified.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
190