Set Precedence Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
set precedence <0-7>
The set precedence command is an optional command for a QoS map that can be used to modify the IP
precedence value (on matching packets) to the specified value.
Syntax Description
<0-7>
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1
Usage Examples
This command sets the IP precedence value (for all matching traffic) to 5:
(config)#qos map VOICEMAP 10
(config-qos-map)#set precedence 5
61200990L1-35E
Specifies the decimal IP precedence value.
Command was introduced.
Copyright © 2005 ADTRAN
Quality of Service (QoS) Map Commands
1168