Fqdn (Ca Profile Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
fqdn <fqdn>
Use the fqdn command to specify a fully-qualified domain name (FQDN) to be included in the certificate
requests.
Syntax Description
<fqdn>
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the FQDN only once
rather than every time you go through the enrollment process. Refer to
316.
Usage Examples
The following example specifies company.com as the FQDN to be sent in certificate requests:
(ca-profile)#fqdn company.com
61200990L1-35E
Specifies the FQDN (e.g., company.com) to be included in requests.
Command was introduced.
Copyright © 2005 ADTRAN
CA Profile Configuration Command Set
crypto ca enroll <name> on page
1034