Connect-Sequence Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
connect-sequence
Use the connect-sequence command to provide instructions to the interface on how to use the resource
pool and telephone numbers to connect to demand destinations. Use the no form of this command to
restore the default values.
Variations of this command include the following:
connect-sequence <sequence number> dial-string <string> forced-analog
connect-sequence <sequence number> dial-string <string> forced-analog busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> forced-isdn-56k
connect-sequence <sequence number> dial-string <string> forced-isdn-56k
busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> forced-isdn-64k
connect-sequence <sequence number> dial-string <string> forced-isdn-64k
busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> isdn-56k
connect-sequence <sequence number> dial-string <string> isdn-56k busyout-threshold <value>
connect-sequence <sequence number> dial-string <string> isdn-64k
connect-sequence <sequence number> dial-string <string> isdn-64k busyout-threshold <value>
Syntax Description
<sequence number>
<string>
forced-analog
forced-isdn-56k
forced-isdn-64k
isdn-56k
isdn-64k
busy-threshold <value> Optional. Specifies the maximum number of connect sequence cycles during a
Default Values
By default any dial resource may be used.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
61200990L1-35E
Specifies the number for this connection specification entry. Range: 1 to 65,535.
Specifies the telephone number to dial when using this connection. The dial
string is limited to 20 digits.
Specifies that only analog resources may be used.
Specifies that only ISDN resources may be used. Call is placed using ISDN 56k.
Specifies that only ISDN resources may be used. Call is placed using ISDN 64k.
Specifies any dial resource may be used if ISDN 56k call-type is used.
Specifies any dial resource may be used if ISDN 64k call-type is used.
activation attempt that must fail before it is skipped until the next activation
attempt.
Command was introduced.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
641