Dial-Backup Randomize-Timers (Tunnel Configuration Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dial-backup randomize-timers
Use the dial-backup randomize-timers command to randomize the call timers to minimize potential
contention for resources. Use the no form of this command to return to the default value. For more detailed
information on PPP dial-backup functionality, refer to the Functional Notes and Technology Review
sections of the command dial-backup call-mode [answer | answer-always | originate | originate-answer |
originate-answer-always]
Syntax Description
No subcommands.
Default Values
By default, the AOS does not randomize the dial-backup call timers.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example configures the AOS to randomize the dial-backup timers associated with this
endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup randomize-timers
61200990L1-35E
on page 977.
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
Tunnel Configuration Command Set
985