Show Ip Bgp Community-List Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip bgp community-list <community-list-name> [exact]
Use the show ip bgp community-list command to display Border Gateway Protocol (BGP) routes that are
permitted by the specified community list.
Syntax Description
<community-list-name> Specifies the name of the community list whose routes you wish to see.
exact
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1
Functional Notes
Information displayed includes the ID of this router and its Autonomous System number, the destination
Network address of the route learned, the Next Hop address to that network, the Metric, the Local
Preference value (set using the "set local-preference *" command), and the Autonomous System Path to
the destination network.
61200990L1-35E
Optional. Restricts the routes displayed to only those whose community lists
exactly match those specified in the named community list. If this parameter is
omitted, all routes matching any part of the specified community list will be
displayed.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
192