ADTRAN 5000 Series Command Reference Manual page 437

Command Reference Guide
Command History
Release 5.1
Release 7.1
Functional Notes
RADIUS servers (as defined with the radius-server command) may have many optional parameters.
However, they are uniquely identified by their addresses and ports. Port values default to 1812 and 1813
for authorization and accounting, respectively. If a server is added to a named group but is not defined by a
radius-server command, the server is simply ignored when accessed. Empty server lists are not allowed.
When the last server is removed from a list, the list is automatically deleted.
Usage Examples
The following example shows a typical configuration of these parameters:
(config)#radius-server challenge-noecho
(config)#radius-server deadtime 10
(config)#radius-server timeout 2
(config)#radius-server retry 4
(config)#radius-server key my secret key
61200990L1-35E
Command was introduced.
Added enable-username selection.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
437