Ip Policy Route-Map - Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip policy route-map <mapname>
Use the ip policy route-map command to associate a route map with a network interface source. Use the
no form of this command to disable this feature.
Syntax Description
<mapname>
Default Values
By default, policy-based routing is disabled for all interfaces.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following example associates the route map named MyMap with demand interface 1:
(config)#interface demand 1
(config-demand 1)#ip policy route-map MyMap
61200990L1-35E
Specifies the route map to associate with this interface.
Command was introduced.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
667